Midwest Commercial Roofing Company Named after Town in Kansas

When you start a business, one of the first things people ask you is, "How did you come up with the name?" We get asked that a lot, especially now, where the name doesn't correspond to anything people can put their finger on immediately.

Washington Roofing & Insulation, part of Washington Companies, Inc., is not named after the state, nor a famous person like George or Denzel, and it doesn't represent our political affiliations in any way.

It was named because Chuck Carpenter, owner, started the company 35 years ago in the small town of Washington, Kansas. Located in north-central Kansas off of Hwy 56, Washington is 20 minutes south of the Nebraska line and 50 miles north of Manhattan. It is home to around 1100 people.

Now our main office is located in Great Bend, Kansas with offices in Claremore, Oklahoma and Kansas City. We provide commercial roofing solutions with SPF foam roofing, elastomeric roof coatings and total building insulation with air barrier systems and products. We service the entire midwest, from Iowa, Missouri, Oklahoma and Texas, and have installed millions of square feet of roofing.

So people do squint their eyes at us and ponder how we got our name, and it makes us smile. In the end it never matters, because no matter which political party you belong to, the bottom line is that when we're finished, your roof won't leak.  

~ GO FORTH AND VOTE! ~

The Importance of the Climate Zone Map

In order to provide the insulation material for your building, the BASF educates contractors to reference the the U.S. Department of Energy's climate zone map. The map breaks the United States up into two main areas: dry and moist, and further breaks it down into eight zones.

Each zone has specific requirements for how spray polyurethane foam should be applied. To spare you with all the technical jargon, SPF is applied differently from one zone to the next, depending upon climates.

"Both open-cell and closed-cell spray foam are air impermeable and can help to reduce energy losses and avoid condensation by increasing the airtightness of the enclosure if the enclosure is properly designed and the spray foam is properly installed. Open-cell foam is vapor permeable so care must be taken in colder climates to minimize the risk of vapor diffusion wetting of the exterior sheathing. Hybrid applications, known as “flashand- batt” or “flash-and-fill” or “combo systems” consist of spray foam against the exterior sheathing covered with a layer of fibrous insulation. Spraying foam directly against exterior foam insulation is also possible as a hybrid approach but care must be given during the foam application process." Spray Foam Guide, Building Science Corporation 2011.

As a performance-based mid-western spray polyurethane roofing and air barrier company we take understanding the reasons behind the different applications very seriously. We are committed to providing our clients with nothing less than an exception final product so continual staff education in SPF design and installation is a priority.

A Roof Management Plan

Do you have a roofing management plan? It is sometimes the case that when many organization think about implementing a roofing management plan, their roofs actually need to be replaced and they are looking for immediate funding.

Most building owners or facility managers agree that regular roof inspections are important to "reduce ownership costs, reduce leak frequency and severity, extend roof life, and reduce management inefficiencies."

In order to begin your roof management plan, first start with a historical record of your building's roof. You will  need when it was installed, who installed it, what type of system, warranties, who the manufacturer was, leak and repair history.

Then you will need to actually need a roofing professional to perform a "condition assessment," both visual and non-destructive. If in-house employees are trained in roof inspections you can utilize them, as well. If you hire an outside contractor, make sure they familiar "with the design, installation, repair, and types of failure specific to the roof system being surveyed."

Your survey documentation should be complete with photos, checklists and condition report. This information will be of value for the roofing contractor you hire in the future when your roof needs repair or replaced.

We'll dive further into roof management plans on our next post.

Source: Roof Inspections: A Closer Look

Up On the Roof Top

We have been "up on the roof top" now for over 35 years and have never been mistaken for Ol' St. Nick, albeit we would find it to be a complimentary identity mishap. The jolly man himself may have a bigger service area and a larger target audience but our mid-western clientele is pretty extensive with places in Texas, Oklahoma, Texas, Iowa and of course, Kansas.

We have met some fantastic people along the way, and they are all pretty satisfied with their polyurethane spray foam roof systems or their air barrier systems for their commercial buildings.  This last year has been quite a ride. We became Air Barrier Association of America (ABAA) accredited to install Air Barrier systems and, along with many others, are currently working with the Beta Theta Pi Fraternity House at the University of Missouri in Columbia, Missouri.

But aside from all of that, we want to wish everyone happy holidays and the best for the 2012 new year. We are looking forward to being "up on the roof top" for many more years to come.

Is Your Community StormReady?

StormReady is a program started by the National Weather Service (NWS) in Tulsa, Oklahoma 12 years ago to help arm communities "with the communication and safety skills needed to save lives and property-before and during the event, " according to the StormReady website.

As of September 6, 2011 Oklahoma is leading the Midwest with 86 StormReady designations, while Missouri comes in 2nd with 63; Kansas 32; Iowa 30 and Nebraska with 24. Our big southern neighbor, Texas, comes in big at 115.

What does that means to residents? It shows that these areas are prepared to help prevent weather-related deaths and injuries through planning, education and early warning systems. 

To become a StormReady designation (a county, city, commercial site, university or supporter site) the area must show they follow six guidelines: Communication, NWS Information Reception, Hydrometerological Monitoring, Local Warning Dissemination, Community Preparedness and Administrative.

Cities, counties, commercial sites, and universities can become StormReady, Tsunami Ready or both. To learn more about this program and to see if your community or University is StormReady, go to the StormReady website.

What is Spray Polyurethane Foam Roofing?

Spray polyurethane foam, commonly referred to as SPF is a spray-applied insulating foam plastic that is installed as a liquid and then expands many times its original size. Spray polyurethane foam can be adjusted and have many different physical properties depending on the use desired.

For example, the same basic raw materials that can make insulation foam semi-rigid and soft to the touch also creates high density roofing foam that is resistant to foot traffic and water. Specialized equipment is used to apply the spray polyurethane foam and proper technical training is important in order to get the best results.

For roofing, spray polyurethane foam insulates and eliminates thermal bridging through fasteners or gaps in decking while providing a long-lasting roofing system that has a life that can be extended by re-coating or recovering in an average of > 10 – 15 years. As a result spray polyurethane foam is used in a wide variety of applications including, but is not limited to:

• Roofing
• Air barriers
• Commercial and residential insulation in walls, ceilings, attics and basements
• Industrial insulation for pipes and tanks, cold storage facilities, freezers, walk-in coolers, and climate controlled buildings such as produce storage and clean rooms
• Flotation for boats, ships, barges, floating docks, etc.
• Higher density spray polyurethane foam has been used to increase the structural strength of wings in airplanes.

For more information on Spray Polyurethane Foam Roofing in Kansas, Iowa, Oklahoma and Texas, please visit http://www.washingtoncompaniesinc.com/what-is-spray-polyurethane-foam.html.